Re
cording
Manual recording functions
60
LSQT1048
Select [
] mode, fill the screen with a white subject
and then move the joystick up to select [
].
When the [
] display changes from flashing to on, setting is complete.
≥
When the [
] display continues flashing green, the white balance
cannot be set because the place is dark etc. In this case, use the
automatic white balance.
∫
About the white balance sensor
A
The white balance sensor detects the type of light source during
recording.
Do not cover the white balance sensor during recording, or it may
not function properly.
≥
When the [
] display flashes white, the manual
white balance previously adjusted is stored.
Whenever recording conditions change, re-set the
white balance for correct adjustment.
≥
When the unit is turned on with the lens cap fitted,
the automatic white balance adjustment may not
function properly. Please turn the unit on after
removing the lens cap.
≥
When setting both the white balance and the iris/
gain, set the white balance first.
To set the white balance manually
MNL
A
LSQT1048(ENG).book 60 ページ ２００６年２月６日 月曜日 午後２時１３分
