UT-MB5 Series / UT-MA6 Series Touch Screen Control Panel V1.02L13M03
Installation Procedure
This document describes how to install Touch Screen Control Panel V1.02L13M03 for
above models running Windows 7 / Windows 8.1. Please read this document carefully
before install it.
1
General
This application consists of the following two functions.
- Touch Screen Control Panel
can change sensitivity of the touch screen in order to improve incorrect touch
action caused by strong radio waves.
- Touch Screen Switch Utility
can disable/enable touchscreen operation.
(Operation is available only with the optional electronic touch pen or mouse)
2
CAUTION:
Log on to Windows as an administrator.
Don't use Switch User.
Connect the AC adaptor and do not remove it until the installation is complete.
Disconnect all peripheral equipments.
Close all the running applications.
3
Confirm existence and the version of Touch Screen Control Panel.
(1)
(Windows 7)
Touch[(Start)]-[All Programs]-[Panasonic]-[PC Information Viewer]-[PC
Information Viewer]
(Windows 8.1)
Swipe up from the center of the start screen.
