background image

Included Accessories

Check that all of the following items are included with your elite Panaboard.
In the event that an item is missing, please contact your dealer.

List of Accessories

Power Cord

(3 m [9 ft. 10 

1

/

8

 in.])

1

USB Cable

(5 m [16 ft. 4 

7

/

8

 in.])

1

Software CD-ROM

1

AAA Battery (LR03)

(Disposable)

1

Electronic Pen

1

Penpoint

(Replacement)

2

Operating Instructions

(For Basic Operations)

(this document)

1

Warranty

1

Note

The illustration of the power cord shown above is for the United States. The shape of the plug may
vary depending on country/area.

Stand is sold separately.

Store the extra penpoint along with this operating manual.

The warranty may not be included depending on country/area.

About Using the CD-ROM

To prevent damage to the CD-ROM:

Do not touch or write on the surface of the disc.

Do not leave the disc out of the protective case.

Do not leave the disc in the direct sunlight or near heat sources.

Do not place heavy objects on the disc case or drop the case.

To clean the disc, hold the disc by its edges and wipe it from the center to the edges with a dry, soft
cloth.

14

Operating Instructions (For Basic Operations)

Usage

Usage

Содержание UB-T781

































































Отзывы: