Assembling the Electronic Board
6
3
Collapse the shipping box.
Remove the tape on the unopened side of the
shipping box, then collapse the box.
4
Remove the protective plastic bags.
After removing the protective plastic bags from
the screen unit and scanner / printer unit, set
those units on top of the collapsed shipping
box.
• Do not touch the screen film surface as doing so
may damage it.
5
Attach the scanner / printer unit to
the optional stand or wall-mounting
kit.
■
If you are using the stand (option):
1) Hang the scanner / printer unit on the stand
fixtures using the wing bolts
A
or
B
.
• The electronic board can be mounted
200 mm (7
7
/
8
”
) higher than hang position
A
by hanging it with the wing bolts
B
.
2) Install the scanner / printer unit with the two
wing bolts included in the
stand (option)
.
Remove the tape.
Protective plastic
bag
Screen film
surface
Set the unit so that
the gear side is on
the bottom.
Caution
Scanner /
printer unit
A
B
UB-5325_IM_EN.book 6 ページ ２００８年１月８日 火曜日 午後５時７分
