Panasonic TY-ST65PE8, Руководство по эксплуатации

Страница: 19 / 60

19
English
Assembly Procedure
(Cont’d)
2. Attaching the pedestal tube
1) Place the pedestal tubes to fit the holes at the
back of the display.
●
Locate the nuts inside.
(The side with the nuts comes to the downside.)
Nut
Pedestal tube
2) Fix with the 4 display installation screws .
Tightening torque: 1.6 to 2.2 N•m
Note
●
Always use the specified holes to attach the pedestal.
●
Do not install the display vertically using the pedestal.
Display installation screw
3. Attaching the base
1) Insert the base to the pedestal tube.
●
The surface with the label goes to the back of the
display.
●
Be careful not to drop.
2) Fix the base with 4 base installation screws .
●
Tighten the base installation screws from the outside
of the pedestal tube.
Tightening torque: 1.2 to 1.5 N•m
3) To stand the display vertically.
●
Make sure to hold the display with more than two
people.
Base
Base installation screw