9
English
Assembly Procedure
We shall have no liability for any accidents or damage incurred by assembling the product in any manner other than
as provided in the Operating Instructions, or without using parts specified.
1. Preparing the display
Installation must be carried out by at least two
people.
Spreading out a soft cloth, etc., place the display
with the screen facing down.
●
Be careful not to damage the display screen, for
example, by dragging it.
●
When placing the display with the screen facing down,
or lifting it up, never hold or put pressure on the LCD
screen. The LCD screen may be damaged.
Protective sheet
Components
Check that all the parts are accounted for and present in
their designated quantities.
Note
Properly dispose of the package after unpacking the product.
Overturn-prevention parts
Overturn-prevention belt (2)
Screw (2)
(M4 × 16)
Wood screw (2)
(Nominal diameter 4 mm)
■
The images shown in this manual are for illustrative purpose only.
■
Specifications of the product are subject to change without notice.
●
Safely store small parts to keep them out of the reach of infants and young children.
●
Manage screw tightening torques according to the torques specified in the assembly procedure.
●
In tightening screws, use such a tool as a torque screwdriver or torque wrench. Do not use an electric screwdriver
and impact screwdriver.
Stand base (1)
Display installation screw (4)
(M4 × 12)
Stand leg (2)
Stand leg mounting screw (4)
(L)
(R)
(M4 × 16)
