Specifications
●
FAQs, etc.
105
Wireless LAN Adaptor
■
Dimensions (W × H × D)
44 mm × 27 mm × 72 mm
Mass
29 Net
Antenna
Tx 1, Rx 2
Interface
USB2.0
Standard Compliance
IEEE802.11n / IEEE802.11a / IEEE802.11g / IEEE802.11b
Transmission system
MISO-OFDM system, OFDM system, DSSS system
Frequency Range
IEEE802.11n / IEEE802.11a:
5.15 GHz - 5.35 GHz
5.47 GHz - 5.725 GHz
IEEE802.11g / IEEE802.11b / IEEE802.11n:
2.4 GHz - 2.4835 GHz
Transfer rate (standard)
∗
IEEE802.11n: Tx Max. 150 Mbps, Rx Max. 300 Mbps
IEEE802.11g / IEEE802.11a: Max. 54 Mbps
IEEE802.11b: Max. 11 Mbps
Access Mode
Infrastructure mode
Security
WPA2-PSK (TKIP / AES)
WPA-PSK (TKIP / AES)
WEP (64 bit / 128 bit) This device supports WPA and WPA2 encryption.
●
MAC address and Product Identification Marking are located on the bottom of the Wireless LAN Adaptor.
∗
Transfer rates are theoretical values; however, actual communication rate will vary according to communication
environment or connected equipment.
Wireless LAN Adaptor
Declaration of Conformity (DoC)
Hereby, “Panasonic Corporation” declares that this product is in compliance with the essential requirements and
other relevant provisions of Directive 1999/5/EC.
Customers can download a copy of the original DoC to our R&TTE products from our DoC server:
http://www.doc.panasonic.de
Contact in the EU: Panasonic Services Europe, a Division of Panasonic Marketing Europe GmbH, Panasonic
Testing Centre, Winsbergring 15, 22525 Hamburg, Germany
This product is intended to be used in Ireland.
This product is intended for general consumer. (Category 3)
The WLAN feature of this product shall exclusively be used inside buildings.
This product on purpose to connect to access point of 2.4 GHz or 5 GHz WLAN.