Panasonic TX50DX800E, Руководство по обслуживанию

Страница: 15 / 116

CS Maintenance Menu
MPU controls the functions switching for each IICs through IIC bus in this chassis. The following setting and adjustment can
be adjusted by remote control in Service Menu
How to enter into CS Maintenance Menu
Purpose
After exchange parts, check and adjust the contents of adjustment mode.
While pressing [VOLUME ( - )] button on the main unit, press the [RED] button on the remote control for 3 times within
2 seconds.
Note:
CS Maintenance Menu can not be entered when 3D signal input.
Input 2D signal to enter CS Maintenance Menu.
How to exit
Press the [EXIT] button on the remote control.
CS Maintenance Menu
OPT
EDID CLK
DRV CHECK
WB-ADJ
OPT
1.Select [OPT] in CS Maintenance Menu.
2.Press [OK] button or Cursor key [Right] on the remote control.
Exit:
Press the [EXIT] button or the [RETURN] button on the remote control.
CS Maintenance Menu
OPT
7 6 5 4 3 2 1 0
OPT1 0 0 0 0 0 1 0 0
OPT2 1 1 1 0 1 1 1 0
OPT3 0 0 0 0 0 0 0 1
OPT4 0 0 0 0 0 0 0 0
EDID CLK
DRV CHECK
WB-ADJ
Key Command

Press the ( / / / ) button to step up/down/right/left through the functions and adjustments

Press the OK button to change the adjustment values.

Press the RETURN button for return to the main menu.
15