Panasonic TX-P42ST60B, Руководство пользователя

Страница: 44 / 167

- 44 -
●
Flashes red:
Under registering
●
Flashes red once every 1 second:
Under reconnecting to the TV
●
Flashes red 3 times:
Power off (Press and hold for more than 2 seconds when in use,
or automatically power off when registering / reconnecting fails, or
connection is lost)
●
Flashes red once every 2 seconds when in use:
3D mode is selected.
●
Flashes red twice every 4 seconds when in use:
2D mode is selected.
■
Storing and cleaning the 3D Eyewear
●
Store the 3D Eyewear in a cool, dry place.
●
Clean using a soft, dry cloth.
– Wiping the 3D Eyewear with a cloth that is covered in dust or dirt may
scratch the eyewear. Shake off any dust from the cloth before use.
– The lens of the 3D Eyewear is easily broken. Be careful when cleaning
the lens.
●
Do not use benzene, thinner or wax on the 3D Eyewear, otherwise this
may cause peeling of the paint.
●
Do not dunk the 3D Eyewear in liquid such as water.
3D Eyewear - Registration
■
First registration
Perform the first registration when the 3D Eyewear is used for the first time.
1. Turn the TV on
2. Press Power button for about 1 second to turn the 3D Eyewear on
●
The lamp lights for about 2 seconds and then flashes.
●
The 3D Eyewear will be turned on and the registration will start.
●
Place the 3D Eyewear within 50 cm from the TV while registration in
progress.
3. After the registration is successfully completed, the 3D Eyewear will
reconnect with TV automatically when the 3D Eyewear is turned on near
the TV in 3D mode