Panasonic TX-50CX800E, Руководство пользователя

Страница: 120 / 366

2) Set Satellite for the selected LNB.
– Select No Satellite if you do not know the connected satellite.
(Available satellite is searched in Auto Setup .)
– Select User defined to set Test Transponder Frequency manually.
– If you set to Single Cable , additional settings are required. Set
SingleCable Version , User Band , User Band Frequency and PIN
(depending on the Single Cable router you use). For details, read
the manual of the Single Cable router.
Watching > Tuning and editing channels > Selectable satellites
5. Press BACK/RETURN to store.
6. Select Auto Setup and press OK to access.
7. Select Search Mode / Scan Mode and press OK to access.
8. Set the item and press OK to store.
●
Scan Mode
Full
:
Scans the whole frequency range.
Quick :
Scans the suitable frequency for the selected satellite.
●
After settings, select Start scan and press OK to search.
9. A confirmation screen is displayed and press OK to start Auto Setup .
(Settings are made automatically.)
●
When the operation is completed, the channel at the lowest position will
be displayed.
= Note =
●
Set Dual Tuner Mode to On to select DVB-S signal for DVB-via-IP server
function.
■
DVB-C, DVB-T, Analogue
1. Select Auto Setup and press OK to access.
2. Set DVB-C Auto Setup Settings and press OK to store. (DVB-C)
●
Scan Mode
Full
:
Scans the whole frequency range.
Quick :
Scans the suitable frequency in your country.
- 120 -