Panasonic TX-43MX650B, Руководство по эксплуатации

Страница: 10 / 44

English - 9 -
Turning On/Off the TV
Connect power
IMPORTANT: The TV set is designed to operate on
220-240V AC, 50 Hz socket.
After unpacking, allow the TV set to reach the ambient
room temperature before you connect the set to the
mains.
Plug one end (the two-hole plug) of the supplied
detachable power cord into the power cord inlet on
the rear side of the TV as shown above. Then plug
the other end of the power cord into the mains socket
outlet. The TV will switch on automatically.
Note: The position of the power cord inlet may differ depending
on the model.
To switch on the TV from standby
If the TV is in standby mode the standby LED lights
up. To switch on the TV from standby mode either:
• Press the
Standby button on the remote control.
• Press the centre of the joystick on the TV in.
To switch the TV into standby
The TV cannot be switched into standby mode via
joystick. Press and hold the Standby button on the
remote control. Power off dialogue will appear on the
screen. Highlight OK and press the OK button. The
TV will switch into standby mode.
To switch off the TV
To power down the TV completely, unplug the power
cord from the mains socket.
Quick standby mode
In order to switch the TV into quick standby mode
either;
• Press the
Standby button on the remote.
Press again to go back to operating mode.
• Press and hold the centre of the joystick on the TV.
Press again to go back to operating mode.
Your TV continues to operate in the quick standby
mode state, as it regularly checks for updates. This is
not a malfunction, it meets the requirements for energy
consumption. In order to minimise energy consumption
switch your TV into standby mode as explained above.
Note: When the TV is switched into standby mode, the standby
LED can blink to indicate that features such as standby search
or timer is active. The LED can also blink when you switch on
the TV from standby mode.
TV Control & Operation
The joystick allows you to control the Volume /
Programme / Source and Quick Standby-On functions
of the TV.
Note:
The position of the joystick may differ depending on
the model.
To change volume:
With th e front side o f the TV facing
you, push the joystic k right t o increase the volume and
push i t left t o decrease the volume.
To change channel in Live TV mode: Scroll through
the stored channels by pushing the joystic k forwards
or pulling it towards yourself.
To change source in Live TV mode: Press the
centre of the joystick in, the TV options menu will
be displayed. Highlight Source option and press the
centre of the joystick in again, the Inputs list will appear
on the screen. Select the desired source by pushing
the joystic k forwards or pulling it towards yourself a nd
press the centre of the joystick in.
To turn the TV off (Quick Standby):
Press the centre
of the joystick in and hold it down for a few seconds,
the TV will turn into quick standby mode.
To turn the TV off (Standby): The TV cannot be
switched into standby mode via joystick.
To turn on the TV: Press the centre of the joystick in,
the TV will turn on.