English
- 18 -
You can use USB hubs with your TV’s USB input
(
s
)
.
External power supplied USB hubs are recommended
in such a case.
It is recommended to use the TV’s USB input(s)
directly, if you are going to connect a USB hard disk.
Note:
When viewing media files the
Media Browser
menu
can only display a maximum of 1000 media files per folder.
Media Browser
You can play back music and movie files and display
photo files stored on a USB storage device by
connecting it to your TV. Connect a USB storage device
to one of the USB inputs located on the side of the TV.
After connecting a USB storage device to your TV
Sources
menu will be displayed on the screen. Select
the related USB input option from this menu and
press
OK
.
Media Browser
menu will be displayed
on the screen. Then select the file of your choice and
press
OK
to display or play it back. You can access
the content of the connected USB device any time
later from the
Sources
menu. You can also press the
Source
button on the remote and then select your USB
storage device from the list of sources.
You can set your media browser preferences by using
the
Settings
menu.
Settings
menu can be accessed
via the information bar which is displayed on the
bottom of the screen while playing back a video or
an audio file or displaying a picture file. Press the
Info
button if the information bar has disappeared,
highlight the gear wheel symbol positioned on the
right side of the information bar and press
OK
.
Picture
Settings
,
Sound Settings
,
Media Browser Settings
and
Options
menus may be available depending on
the media file type and the model of your TV and its
features. The content of these menus may also differ
according to the type of the currently open media file.
Only
Sound Settings
menu will be available while
playing back audio files.
Loop/Shuffle Mode Operation
Start playback and activate
All files in the list will be
continuously played in
original order
Start playback and activate
The same file will be
played continuously
(repeat)
Start playback and activate
All files in the list will be
played once in random
order
Start playback and activate
,
All files in the list will be
continuously played in
the same random order
To use the functions on the information bar highlight the
symbol of the function and press
OK
. To change the
status of a function highlight the symbol of the function
and press
OK
as much as needed. If the symbol is
marked with a red cross, that means it is deactivated.
Custom Boot Up Logo
You can personalise your TV and see your favourite
image or photo on the screen each time your TV boots
up. To do this, copy your favourite image files onto a
USB disk and open them in the
Media Browser
. Select
USB input from the
Sources
menu and press
OK
. You
can also press the
Source
button on the remote and
then select your USB storage device from the list of
sources. When you have chosen the desired image,
highlight it and press
OK
to view it in full screen. Press
the
Info
button, highlight the gear wheel symbol on
the information bar and press
OK
. Select
Options
and press
OK
to enter.
Set Boot Logo
option will be
available. Highlight it and press
OK
again to choose the
image as custom boot logo. A confirmation message
will be displayed. Select
Yes
and press
OK
again. If
the image is suitable
(*)
you will see it on the screen
during the TV’s next boot up.
Note:
You can use the
Restore Default Boot Logo
option in
the
Settings>System>More
menu to restore the default boot
logo.
If you perfor
m
F
irst Time Installation
the
boot logo will
also be restored to its default.
(*)
Images must have an aspect ratio between 4:3 to 16:9
and they must be in .jpeg or .jpg file formats. The image
cannot be set as boot logo, if its resolution doesn’t appear
on the info banner.
CEC
This function allows the user to control the CEC-
enabled devices, that are connected through HDMI
ports by using the remote control of the TV.
The
CEC
option in the
Setting
s>Devices
m
enu should
be set as
Enabled
at first. Press the
Source
button and
select the HDMI input of the connected CEC device
from the
Sources List
menu. When a new CEC source
device is connected, it will be listed in
Sources
menu
with its own name instead of the connected HDMI
port’s name (such as DVD Player, Recorder 1, etc.).
The TV remote is automatically able to perform the
main functions after the connected HDMI source has
been selected. To terminate this operation and control
the TV via the remote again, press and hold the “0-
Zero” button on the remote control for 3 seconds.
You can disable the CEC functionality by setting the
related option under the
Setting
s>Devices
m
enu
accordingly.
The TV supports ARC (Audio Return Channel). This
feature is an audio link meant to replace other cables
between the TV and an audio system (A/V receiver or
speaker system).
When ARC is active, the TV will mute its other audio
outputs, except the headphone jack, automatically and
volume control buttons are directed to the connected
audio device. To activate ARC set the
Sound Output
option in the
Settings>Sound
menu as
HDMI ARC
.
Note:
ARC is supported only via the HDMI2 input.