Panasonic TX-36PG50, Руководство по обслуживанию

Страница: 7 / 41

ALIGNMENT SETTINGS
(The figures below are nominal and used for representative purposes only.)
1. Set the Bass to maximum position, set the Treble to minimum position, press the down button (- / v) on the customer
controls at the front of the TV and at the same time press the INDEX button on the remote control, this will place the TV
into the Service Mode.
2. Press the RED / GREEN buttons to step up / down through the functions.
3. Press the YELLOW / BLUE buttons to alter the function values.
4. Press the STR button after each adjustment has been made to store the required values.
5. To exit the Service Mode, press the "N" button.
Alignment Function Settings / Special features
Horizontal Position
H – Pos
97
Optimum setting.
Vertical Position
V – Pos
111
Optimum setting.
Horizontal Amplitude
H – Amp
86
Optimum setting.
Vertical Amplitude
V – Amp
134
Optimum setting.
Parabola
Parabola
26
Optimum setting.
Trapezoid
Trapezoid
124
Optimum setting.
Horizontal Parallel
H – Parallel
13
Optimum setting.
Vertical Linearity
V – Linear
34
Optimum setting.
Top Corner
Top – Corner
20
Optimum setting.
Bottom Corner
Bottom – Corner
20
Optimum setting.
Vertical Symmetry Correction
V – S – Correct
9
Optimum setting.
Center Correction
C – Correct
10
Optimum setting.
DAF - Phase
DAF – Phase
205
Optimum setting.
Highlight
Lowlight
High 0144 0126 0128
Low 0331 0340 0384
Optimum setting.
Sub-Brightness
Sub-Brightness
144
Optimum setting.
Video Gain 2
Video Gain 2
157
Optimum setting.
Splitter Gain (Tuner)
SPL. Gain
0
Optimum setting.
7