Panasonic TX-36PB50, Руководство по эксплуатации

Страница: 24 / 44

24
Press the ASPECT button to move through the seven aspect options: Panasonic Auto, 4:3, Zoom,
S---Zoom, 16:9, 14:9 and Just.
Notes:
D
If you leave Aspect set to
Panasonic Auto, the TV software determines the best ratio for each
programme viewed. In order not to disrupt your viewing, no mode information is displayed while
this is happening (eg: a programme may begin in 4:3 mode then seem to jump into Just mode).
Simply press the
ASPECT button to display mode information in the top left of the screen.
D
A 16:9 picture has been used to illustrate all of the aspect modes described in this section.
The on screen selector keys (corresponding to the four coloured buttons on the remote control) that
appear for some Aspect functions clear after a few seconds. If you want to select an operation when the
keys are not shown, press the ASPECT button once more and the keys will reappear.
Panasonic Auto
Panasonic Auto determines the best aspect
ratio to use to display the picture you are
viewing. It does this using a fourstep processto
determine if the picture being viewed is a
widescreen picture.
If
Panasonic Auto detects a widescreen signal
it switches into the appropriate
16:9 or 14:9
widescreen mode. If
Panasonic Auto does not
detect a widescreen signal then the picture is
displayed in Just or 4:3 mode.
The text shown on the screen indicates how
Panasonic Auto determined which ratio touse:
’WIDE’ appears in the top left of the screen if a
widescreeen identification signal (WSS) is
found or a signal is found through a Scart
socket.
Panasonic Auto switches to the
appropriate
16:9 or 14:9 widescreen ratio.
’Panasonic Auto’ appears in the top left of the
screen if black stripes above and belowthe
picture are detected. Panasonic Auto chooses
the best ratio and expands the picture to fill the
screen. This process can take several minutes,
depending howdark the picture is.
’Panasonic Auto’ appears in the top left of the
screen and red and green keys at the bottom if
no indication of a widescreen signal is found,
the picture is displayed in
Just or 4:3 mode. If
the picture has a standard 4:3 aspect ratio then
you may prefer to viewit at its original size, the
red and green keys that appear allowyou to
choose between viewing at standard 4:3 sizeor
expanded in
Just mode.
Equally, you may prefer to select one of the
other modes available to viewthe picture.
Notes:
D
If, in Panasonic Auto mode, you experience problems with the screen display size when playing back widescreen format
recordings from your VCR then it is possible that the trackingcontrol ofyour VCRrequires adjustment(your VCRinstruction
book will contain adjustment details).
D
The widescreen aspect ratios of different films and programmes can vary. If these are wider than a standard 16:9 aspect
picture then a black band may be visible at the top and bottom of the screen.
Aspect controls
ASPECT
’PanasonicAuto’appearsinthetop
left of the screen. The picture is
displayed in
Just or 4:3 mode, red
and green keys appear, allowing
switching between
Just and 4:3
modes.
’PanasonicAuto’appearsinthetop
left of the screen. The best ratio is
chosen and the picture expanded
to fill the screen.
’WIDE’ appears in the top left of the
screen, Panasonic Auto switches
to the appropriate 16:9 or 14:9
widescreen ratio.
ASPECT
Panasonic Auto
Panasonic Auto
Panasonic Auto