MENU
TV/AV
N
14
This menu allows you to make adjustments to the picture quality
Open the Main menu
Move to Picture menu
Access Picture menu
Move to your choice
Increase or decrease levels or set
options
Press the TV/AV button to exit the
menu system
Press the N button to return
the factory setting
The Viewing mode in the Picture
menu allows you to select,
adjust and store three different
screen settings --- Dynamic,
Normal and Cinema.
In each Viewing mode setting,
Contrast, Brightness, Tint ( in
NTSC
only),
Colour,
and
Sharpness can be adjusted and
stored to suit your particular
viewing
requirement
(for
example you may require
different settings for viewing sport, films, news etc.).
Viewing mode offers you up to a maximum of three separate settings for each
signal source: RF, AV1, AV2, AV3 (including RGB).
By analysing and processing the incoming picture, all three modes feature
automatic enhancement.
You can restore the factory settings for the selected profile on the selected signal
source by pressing the “N” button on the remote control.
The Contrast, Brightness, Colour, Tint (in NTSC only) and Sharpness levels can
be adjusted to suit your own preferences and the viewing conditions.
The Colour balance setting allows you to set the overall colour tone of the picture.
P
--
NR will automatically reduce unwanted picture interference.
PICTURE MENU
Picture Menu
Viewing Mode
Dynamic
Contrast
Brightness
Colour
Sharpness
Colour Balance Normal
P-NR
Off
Picture Menu
Viewing Mode
Normal
Contrast
Brightness
Colour
Sharpness
Colour Balance Normal
P-NR
Off
Picture Menu
Viewing Mode
Cinema
Contrast
Brightness
Colour
Sharpness
Colour Balance Normal
P-NR
Off
−
∧
∨
+
OK
Select
Change
Exit
Return
Contrast
Colour
Brightness
Sharpness
Colour balance
P
--
NR
Viewing mode
Tint (
NTSC only
)
