Panasonic TX-29AD1DP, Руководство по обслуживанию

Страница: 7 / 40

Service position for the A-Board
1. Remove the A-board from the main chassis (E-board), see fig. 5, ensuring all leads are disconnected.
2. Remove the two screws (A) (fig.9) from the plastic AV cover and unclip the AV cover from the A-board.
3. Unclip the front metal cover (Fig10) and remove from the A-board.
4. For ease of servicing remove the rear metal cover by desoldering (Fig.11)
5. Fit the extension leads to the A-board making sure that the A-board does not touch the E-board (fig.12).
6. After servicing ensure all wiring is returned to its original position before returning the receiver to the customer.
Note : The extension lead wire kit is supplied as a service kit. (Part number TZS2EP001).
Service Position for the K-Board
A
A
1. Remove the two screws (A) indicated in fig.13 to release K-Board
2. Slide the K-Board out of the chassis holding position and gently release making sure that the K-board does not touch the
E-board.
All manuals and user guides at all-guides.com