20
Shipping condition
Press the
MENU
button.
Move to
Setup menu
.
Access
Setup menu
.
Move to
Shipping condition
.
Access
Shipping condition
.
Press the
OK
button to start.
Press again, to con
fi
rm, each time that you are asked, “Are you sure?”.
Switch the TV off at the mains power switch.
The next time you switch the TV on, Auto setup will begin. Analogue
stations will be located, sorted and stored ready for use. See page 7.
Shipping condition allows you to reset the TV to its original condition, i.e. no channels tuned in.
This is useful, for example, if you move to a different area when you will probably want the TV to tune itself to your
new local stations.
Note:
Owner ID information will not be affected by this function.
This can be done either through the
Shipping condition
menu or through the
Auto setup
menu.
The
Shipping condition
menu will reset all data, except Owner ID information, clearing all Analogue tuning information
and resetting all control levels back to factory settings.
You may need to adjust your VCR or programme position ‘0’ VCR after operating the
Shipping condition
menu.
All tuning data will be erased
Are you sure ?
Are you sure ?
Shipping condition
Exit
Return
Start
Q-Link
AV2 out
Off timer
Tuning menu
Owner ID
Shipping condition
Setup menu
AV2
TV
Off
Power on preference
TV
Teletext
FASTEXT
Access
MENU
OK
TV
N
1
2
3
4
5
6
7
8
9
0
OK
C
