32
Q-Link Functions
Q-Link connects the TV and VCR / DVD recorder, enables easy recording and playback.
Ŷ
Condition
Ŷ
Features available
Some recording equipments are not applicable. Read the manuals of the equipment.
Information
/ Message
Recording information or if recording is not possible, a message is displayed.
(Only when the programme number is “0” or “AV mode” for some equipment.)
Power
on link
and Easy
playback
When VCR or DVD recorder starts playback or direct navigator / function menu
for the equipment are activated, the TV is turned on and input mode is switched
automatically so that you can view the content. (Only when TV is in Standby mode.)
Power off
link
When TV is set to Standby mode, the recording equipment is also automatically
set to Standby. (Only when the videocassette or DVD is not active.)
•
Use the VCR / DVD recorder with the following logos:
“Q-Link”, “NEXTVIEWLINK”, “DATA LOGIC”, “Easy Link”, “Megalogic”, or “SMARTLINK”
•
Connect the equipment to this TV’s AV1 or AV2 terminal via a “fully-wired” SCART cable. (p. 36)
•
Q-Link terminal setup in Setup menu (Q-Link, AV1 / AV2 out). (p. 21)
• “DATA LOGIC” (a trademark of Metz Corporation)
• “Megalogic” (a trademark of Grundig Corporation)
• “Easy Link” (a trademark of Philips Corporation)
• “SMARTLINK” (a trademark of Sony Corporation)
Read the manuals of the equipment too.
Ŷ
Download analogue channel settings
•
Perform Auto Setup. (p. 27)
When fi rst using this TV, see “Auto Setup”. (p. 10)
•
Perform download to the equipment. (p. 21)
What you
see is
What you
record
GUIDE
INPUT
RETURN
MENU
OK
ASPECT
OPTION
VCR
1
3
2
4
6
5
7
9
8
0
EXIT
DIRECT TV REC
DIRECT TV REC
Direct TV Recording:
Recording the current programme in VCR / DVD recorder
immediately.
Ŷ
To change DVB channel, stop recording
EXIT
•
When Direct TV Recording is performed, the
recording equipment is automatically turned
on if it is in Standby mode.
•
The recording equipment is recording from
its own tuner. You can turn the TV off during
recording (Analogue only).
•
If you turn the TV off during recording from an
AV source, the recording will be stopped.
•
When Direct TV Recording is performed while
watching DVB channel, the DVB programme
position is locked and no other DVB channel
can be selected. However you can watch
analogue channels.
