40
Troubleshooting
Starting
Up
Other startup
problems.
(continued)
Start the computer in Safe Mode and check the error
details. When the [Panasonic] boot screen disappears
*1
at
startup, press and hold
+
(F8) until the Windows
Advanced Options Menu is displayed.
*1
When [Password on boot] is set to [Enabled] in the [Secu-
rity] menu of the Setup Utility, [Enter Password] appears
after the [Panasonic] boot screen disappears. As soon as
you enter the password and press
(Enter), press and
hold
+
(F8).
Shutting
down
Windows does not
shut down.
Remove the USB device.
Wait one or two minutes. It is not a malfunction.
Display
No display.
The external display is selected. Press
+
(
) to
switch the display. Wait until the display has been
switched completely before pressing
+
(
)
again.
When using an external display,
Check the cable connection.
Turn on the display.
Check the settings of external display.
The display is turned off by the power-saving function. To
resume, do not press the direct selection keys, but press
any other key like
.
The computer entered
sleep (
) / standby
(
)
or hibernation by the power-saving func-
tion. To resume, press the power switch.
The screen may not be displayed even after the computer
resumed from standby or hibernation. In this case, press
+
(
) to enter standby and resume the computer
again.
The screen is dark.
The screen is darker when the AC adaptor is not connect-
ed. Press
+
(
) and adjust the brightness. As you
increase the brightness, battery consumption increases.
You can separately set the brightness for when the AC
adaptor is connected and when not connected.
Troubleshooting (Basic)
CF-U1̲Vista̲US.indb 40
CF-U1̲Vista̲US.indb 40
2009/02/19 16:35:38
2009/02/19 16:35:38