23
Get
ting St
arted
U
seful In
formati
on
Troubleshooting
Appendix
2
Insert the RAM module parallel to the slot firmly until the gold
terminals are invisible.
If it is hard to insert the RAM module, do not try forcibly but check the mod-
ule’s direction.
3
Press the RAM module down until the right and left hooks (D)
lock into place.
When pressing down the module, the right and left hooks will open slightly
and will return after locking.
If it is hard to press down the RAM module, do not try forcibly but check the
module’s direction.
4
Set the cover and battery pack back.
NOTE
If the RAM module is recognized correctly, the total size of this computer’s memory and RAM module memory is dis-
played on the [Information] menu of the Setup Utility.
If the RAM module is not recognized, turn off the computer and insert it again.
1
Carefully open the left and right hooks (E).
The RAM module will be raised.
2
Carefully remove the RAM module from the slot.
3
Set the cover and battery pack back.
Removing the RAM Module
D
E
