15
Getting Star
te
d
8
Calibrate the touchscreen.
1
Select [start] - [Control Panel] - [Printers and Other Hardware] - [Mouse] -
[TouchScreen] - [Calibration].
2
Touch the “+” mark on the calibration screen with the stylus (included) for about
one second.
3
After the calibration procedure is executed (e.g., after the nine “+” marks are
touched), the procedure ends when
Enter
is pressed.
4
Select [OK].
1
Select [start] - [Control Panel] - [User Accounts] - [Create a new account].
2
Enter a name for the new account, then select [Next].
3
Select [Computer administrator], then select [Create Account].
4
<When you want to create a password for the new account>
Select the new account you have created and select [Create a password].
Follow the instructions on the screen to create a password.
5
Select [start] - [Turn Off Computer] - [Restart] to restart the computer.
CAUTION
Remember this password! If the password is forgotten, Windows cannot be oper-
ated. You can create a password reset disk beforehand (
page 17).
5
Enter your computer name and administrator password and then select [Next].
CAUTION
Remember this password! If the password is forgotten, Windows cannot be
operated.
6
Enter the correct date, time and time zone, then select [Next].
The computer will restart.
7
Enter your administrator password and select .
9
Create a new account.
NOTE
It may take some time before the computer restarts and the screen of step
7
is displayed. Wait, and do not press any keys, or touch the touch pad, etc.
NOTE
When Windows setup is completed, the following message will be displayed
at the bottom right of the screen: “Your computer might be at risk.” Con-
tinue to the next step.
The message is generated by the [Security Center] function in [Control Panel],
and does not indicate an error or malfunction. For more information about
[Security Center]:
page 27.
Содержание Toughbook CF-18FHAZXBM
Страница 51: ...51 Appendix Appendix Memo ...
