Panasonic Toughbook CF-18BCAGCMM, Руководство по эксплуатации

Страница: 37 / 52

37
Tr
oub
leshooting
The display cannot be ro-
tated and the operation of
the touch pad and the touch-
screen do not match the dis-
play angle
The display is not rotated
automatically by switching
from Laptop mode to Tab-
let mode, or vice versa
The display fails to rotate
even when the rotation but-
ton is pressed
When the screensaver starts
while the display is rotated,
nothing is displayed on the
screen
Display Rotation
When some applications are running, the display may not be rotated and the operation of
the touch pad and the touchscreen may not match the display angle. Press the rotation
button 1 - 3 times (until the operation of the touch pad and the touchscreen matches the
display angle). After exiting the application, rotate the display, then start up the applica-
tion again.
If the problem persists, restart the computer.
Confirm that the default angle of each mode is correctly set. (
“Display Rotation”)
Do not switch from Laptop mode to Tablet mode, or vice versa, while Windows is in the
process of switching users with the Fast User Switching function.
Close the applications which are open.
Some screensaver types do not display anything on the screen for the first minute or so.
Try changing the screensaver type.
Touch Pad / Touchscreen
If you are using an external mouse, ensure that the external mouse has been connected
correctly.
Restart the computer by using the keyboard (Press ,
U
, and select [Restart] with
R
).
If the computer does not respond to keyboard commands, read “No response”
(
page 38).
Has the Setup Utility been used to set [Touch Pad] to [Enable]?
When external mouse drivers are installed (e.g., IntelliMouse), the touch pad may not be
used.
Has the touch pad driver been properly installed?
As a result of the physical characteristics of the touchscreen, sometimes the position of the
stylus does not match the position of the cursor on the screen. This is not a malfunction.
Perform [Calibration] (
page 18).
Has the Setup Utility been used to set [Touchscreen] to [Enable]?
When external mouse drivers are installed (e.g., IntelliMouse), the touchscreen is unable
to be used. Reinstall the touchscreen driver.
Has the touchscreen driver been properly installed?
The cursor cannot be con-
trolled properly
Unable to input using the
touch pad
Unable to point correctly
with the stylus included with
the computer
Unable to input by touching
the display
The orange indicator blinks Battery cannot be recharged temporarily because the internal temperature of the battery
pack is outside of the acceptable temperature range for recharging. Once the allowable
range requirement is satisfied, charging begins automatically. Your computer can be used
normally in this state.
Battery Indicator (continued)