1
2
3
1
2
3
TV
1
2
3
4
5
6
7
8
9
C 0
OK
6
Check that you have the accessories and items shown
Accessories
Operating Instructions
Remote Control
Transmitter
(N2QAKB000057)
Mains Lead
Pan European
Guarantee Card
Fitting remote control batteries
• Make sure that the batteries are
fi
tted the correct way round.
• Do not mix old batteries with new batteries. Remove old, exhausted batteries immediately.
• Do not mix different battery types, i.e. Alkaline and Manganese or use rechargeable (Ni-Cad) batteries.
Batteries, packaging and old equipment should not be disposed of as domestic waste,
but in accordance with the applicable regulations.
Pull and hold the hook, then
open the battery cover.
Insert batteries - note correct
polarity ( + and -).
“R6 (UM3)” size
Replace the cover.
3
2
1
Batteries for the Re mote
Control Transmitter
(2
×
R6 (UM3) size)
Clamper
×
2
Ferrite core
(Small size)
×
1
Ferrite core
(Large size)
×
1
Installing the ferrite core
(Small size)
See page 38.
Installing the ferrite core
(Large size)
See page 41.
Open
Open
Pull back the tabs.
(in two places)
Press the cable
through and close.
Pull back the tabs.
(in two places)
Press the cable
through and close.
