Panasonic TH112S, Руководство пользователя

Страница: 14 / 18

Speed Dialer (Base Unit)
Storing Phone Numbers in Memory
You can store up to 5 numbers in the base unit. The dialing buttons
( 1 to 5 ) function as memory stations.
The TALK and SP-PHONE indicator lights must be off before
programming.
1
Press .
•
The IN USE/CHARGE indicator
flashes.
2
Enter a phone number up to
22 digits.
•
If you misdial, press
twice to end storing,
then start from step 1.
3
Press .
4
Press a memory station
number ( 1 to 5 ).
•
A beep sounds.
•
To store other numbers,
repeat steps 1 through 4.
•
If a pause is required for dialing, press where
needed. Pressing counts as one digit.
To erase a stored number
Press twice
the memory station number
( 1 to 5 ) for the phone number to be erased.
Dialing a Stored Number
1
Press .
2
Press .
3 Press the memory station
number ( 1 to 5 ).
•
The stored number is
dialed.
•
Numbers stored in the base unit can only be dialed by the base unit.
•
If your line has rotary or pulse service, any access numbers stored
after pressing will not be dialed.
Special Features
FLASH Button
Pressing allows you to use special features of your host
PBX such as transferring an extension call or accessing special
telephone services (optional) such as call waiting.
Selecting the flash time
The flash time depends on your telephone exchange or host PBX.
You can select the following flash times: ì90, 100, 110, 250, 300,
400, 600, 700 msec (milliseconds)î, using the handset near the
base unit.
Your phone comes from the factory set to ì700 msecî.
The TALK and SP-PHONE indicator lights must be off before
programming.
1 Press .
•
The TALK indicator flashes.
2
Press a dialing button
( 1 to 8 ).
1 : 90 msec 2 : 100 msec
3 : 110 msec 4 : 250 msec
5 : 300 msec 6 : 400 msec
7 : 600 msec 8 : 700 msec
3 Press .
4 Press .
•
A beep sounds.
•
If 3 beeps sound in step 4,
ñ a wrong key was pressed. Restart from step 1.
ñ the handset is too far from the base unit. Move closer to the
base unit or place the handset on the base unit. Restart
from step 1.
•
If a power failure occurs, the setting will return to the factory
preset (700 msec). Reprogram if necessary.
•
If you are connected via a PBX, a longer flash time may be
necessary to use PBX functions (transferring a call, etc.). Consult
your PBX installer for the correct setting.
TALK Indicator
Memory Station
Numbers
IN USE/CHARGE
Indicator
Memory Station
Numbers