Panasonic TH-P60S60A, Руководство пользователя

Страница: 119 / 128

- 119 -
●
Check that the aerial and antenna cable are designed for DTV reception.
If you live within 5-10 km of DTV transmission towers, a combined VHF
/ UHF Digital TV aerial should be adequate. Outside this area, separate
VHF and UHF aerials provide superior reception performance.
●
If you live in a unit or apartment, check to ensure the Master Antenna
TV (MATV) system is designed for analogue and DTV reception. Please
consult your body corporate.
Picture infrequently pixelates on some or all channels
●
Electrical interference caused by local or distant lighting storms, heavy
rain, high wind etc. may cause picture to break up and / or audio to mute /
distort momentarily.
●
Impulse noise interference from an infrequently used electrical appliance,
or a passing vehicle or lawn mower with a “noisy” ignition system.
●
Older style antenna cabling, loose fitting/corroded wall socket connections
/ terminals etc.
Picture regularly pixelates on some channels, or No signal message
●
Check Signal Condition via TV Setup menu. If Signal Quality or Signal
Strength is red/orange or constantly changing, check aerial/cable/
connections. If the problem persists, consult your local TV antenna
installer.
●
Too much signal; is Signal Strength always at full strength? If yes, try
attenuating (reducing) the signal strength.
●
Check that the aerial and antenna cable are designed for DTV reception.
●
The received signal may be too weak to allow the TV to reliably lock to the
selected channel to generate a viewable picture. If the problem persists,
consult your local TV aerial installer.
●
Interference from household appliances (known as impulse noise) such
as light switches, fridges etc. may cause picture break up and / or audio
distortion. Use high quality quad shielded coaxial cable (RG6Q) fly lead
between TV and antenna wall socket to minimise impulse noise pickup. If
the problem persists, consult your local TV aerial installer.
●
Antenna installation may be using an aerial amplifier that is faulty or an
older style aerial amplifier that was not designed for digital TV.
●
Older style antenna cabling, loose fitting / corroded wall socket
connections / terminals etc.
●
Turn the TV off with Mains power On / Off switch, then turn it On again.