manualshive.com logo in svg

Panasonic TH-84LQ70U, Руководство по эксплуатации

Поделиться
Скачать
Panasonic TH-84LQ70U Скачать руководство пользователя страница 12

English

12

●

 

 Dispose the Power supply cord cap and packaging 
materials appropriately after taking out the items.

 

  Remote Control Batteries

 1.  Pull and hold the hook, then open the battery cover.

 

 2.  Insert batteries - note correct polarity (+ and -).

 

 AAA/R03/UM4 type

 3. Replace the cover.

 Helpful Hint

●

 

 For frequent remote control users, replace old 
batteries with Alkaline batteries for longer life.

 

 

 Precaution on battery use

 Incorrect installation can cause battery leakage 
and corrosion that will damage the remote control 
transmitter.
 Disposal of batteries should be in an environment-
friendly manner.

 Observe the following precaution:

 1.  Batteries shall always be replaced as a pair. Always 

use new batteries when replacing the old set.

 2.  Do not combine a used battery with a new one.
 3.  Do not mix battery types (example: “Zinc Carbon” with 

“Alkaline”).

 4.  Do not attempt to charge, short-circuit, disassemble, 

heat or burn used batteries.

 5.  Battery replacement is necessary when remote 

control acts sporadically or stops operating the 
Display set.

 6.  Do not burn or breakup batteries.
 7.  Batteries must not be exposed to excessive heat such 

as sunshine, fire or the like.

 

  Important notice when attaching the 
fixing brackets

98-inch model

 When attaching the optional fixing brackets to 98-inch 
model, attach the stand hooks to the positions as shown 
in the picture below, in accordance with the types of 
fixing brackets.

 Position to attach stand hook

 

A

B

C

 A:  Ceiling-hanging bracket (Stand hooks are not 

needed as supplied bolt is used for installation.)

 B:  Wall-hanging bracket
 C:  Pedestal

  About Eyebolt

 This unit has one Eyebolt (M12) attached to the 
middle of the upper part at the time of shipment. When 
installing, use this to pull up the unit. Also, if needed, use 
the Eyebolt holes as shown in the picture below.

 Eyebolt mounting positions

 

 Eyebolt

 Note

●

 

 Ask a qualified technician to carry out installation.

●

 

 Do not use Eyebolts or screws other than the ones 
supplied with the unit.

●

 

 After installing, remove the Eyebolt, and then close 
the hole with the supplied Eyebolt cap.

Содержание TH-84LQ70U



















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды