Connections
AC cord connection
Back of the unit
AC cord attachment
AC cord (supplied)
Plug the connector into the display unit.
Push it into the socket until it clicks.
Note
●
Make sure that the connector is locked on both
sides.
Unplugging the AC cord
Unplug the connector by squeezing the two catches.
Notes
●
Be absolutely sure to unplug the AC mains cable
from the wall socket before disconnecting it from the
Display.
●
The AC cord supplied with the Display is for exclusive
use with this Display. Do not use it for other purposes.
Cable fixing
Note
●
Three cable fasteners are supplied with this unit. Fix
the cables at three locations using the holes provided,
as shown below.
If you need more fasteners, purchase them from your
dealer. (Available from customer service)
1. Attach the cable fasteners
Squeeze the side
catches together and
pull the plug straight out.
Hole
Push the cable tie
fastener into a hole until
it clicks.
To remove from
the unit:
snaps
2. Bundle the cables
Keep pushing the catch
and pull the cable tie
out.
Hooks
Push the end of the
cable tie between
the hooks and pull to
tighten.
To loosen:
Catch
17
English
