Panasonic TH-55LFV9U, Руководство по эксплуатации, Страница: 7 / 24

Clean the power cable regularly to prevent it
becoming dusty.
•
If dust builds up on the power cord plug, humidity
can damage the insulation, which could cause fire.
Disconnect the power cable from the mains outlet and
wipe the cable with a dry cloth.
Do not stand on, or hang from the display.
•
Serious damage and injury might result. Pay special
attention to children and keep them out of harm’s way.
Be sure to insert batteries correctly (+ and -) make
sure the polarity is not reversed.
•
Mishandled batteries can leak, or even explode
and cause fire. This can result in serious injury and
damage to property.
•
Insert batteries correctly as instructed. (see page 11)
Do not use batteries with a damaged or missing
outer cover.
(The outer cover is attached to the battery for safety
and must not be removed doing so may cause short
circuits.)
•
Mishandling the batteries can cause them to short
circuit, resulting in fire, injury or damage to property.
Remove the batteries from the remote control
transmitter if it is not to be used for a long time.
•
A battery may leak, heat, ignite or burst, resulting in
fire or damage.
Do not attempt to burn or break up batteries.
•
Batteries must not be exposed to excessive heat such
as direct sunlight, or radiators, stoves or other heat
sources.
Do not turn the Display upside down.
Do not lay the display down with its liquid crystal
panel facing upwards
Precautions for use
Unpacking
•
This product is packed in a carton, together with the
standard accessories.
•
Any other optional accessories will be packed
separately.
•
This display is big and heavy and two people should
be involved when it is moved or unpacked.
•
After opening the carton, ensure that the contents are
complete and in good condition.
Cautions when installing
Do not set up the Display outdoors.
•
The Display is designed for indoor use only.
Install this unit in a location which can support its
weight.
•
Use an installation bracket that conforms to VESA
standards
Temperature of the working environment for this
unit.
•
For a location that is less than 1 400m (4 593ft) above
sea level: 0°C to 40°C (32°F to 104°F)
•
For a location more than 1 400m (4 593ft) but less
than 2 800m (9 186ft) above sea level: 0°C to 35°C
(32°F to 95°F)
Do not install the unit in a location more than 2 800m
(9 186ft) above sea level.
•
Failure to comply with this requirement may shorten
the life of the internal parts and result in malfunction.
We are not responsible for product damage, or
any consequences, caused by installation in an
unsuitable environment, even during the warranty
period.
Do not place the display where it may be affected by
salt deposit or corrosive gas.
•
Failure to do so may shorten the life of the internal
parts and result in malfunctions due to corrosion.
Required space for ventilation
•
Make sure to leave at least 10cm (3.94”) of free
space above and below, and on both sides of the
periphery of the display.
There should be at least 5cm (1.97”) or more free
space behind the display.
Specifications of the screws used to secure a wall
hanging bracket that conforms to VESA standards
Inch
model
Screw pitch for
installation
Depth of
screw
hole
Screw
(quantity)
55 400 mm × 400 mm 12 mm M6 (4)
•
Installing multiple displays
The LCDs in a multiple installation may expand
slightly from the heat inside the main unit. This may
7
English