
17
Cable Connection
How to connect the HDMI Terminal
Less than
4"(10 cm)
HDMI
∗
1
is the first all digital consumer electronics A/V interface that supports uncompressed standard. One jack supports
both video and audio information.
This HDMI
∗
1
input can be connected to an EIA/CEA-861/861B
∗
2
compliant consumer electronic device, such as a Set
Top Box or DVD player equipped with HDMI or DVI output connection.
By inputting a High-bandwidth Digital Content Protection (HDCP) high-definition picture source to the HDMI terminal of
this television, high-definition pictures can be displayed on the screen in their digital form.
(HDMI : High Definition Multi media Interface)
∗
1. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI
Licensing LLC.
∗
2. EIA/CEA-861/861B profiles compliance covers profiles for transmission of uncompressed digital videoincluding
high bandwidth digital content protection.
∗
3. Consult your consumer electronics dealer for availability details.
∗
4. (HDMI IN)Please refer to page 24.
•
The HDMI terminal of this equipment is TYPE A.
If the external device has DVI output only, use a
DVI to HDMI adaptor cable
∗
3
to connect to the HDMI
jack. Also, connect the Audio out signal from the
external device.
(Set Top Box or DVD player) to the AUDIO IN
∗
4
jacks
side the HDMI input.
This model support following format.
Please adjust the format of connecting equipment.
1080i
480P
480i
No. of dots (H
×
×
×
×
×
V)
1,920
×
×
×
×
×
1,080i
720
×
×
×
×
×
480P
640
×
×
×
×
×
480P
720(1,440)
×
×
×
×
×
480i
Vertical scanning frequency(Hz)
59.94/60
59.94/60
59.94/60
59.94/60
Applicable VIDEO Signal
This input terminal is not intended for use with computers.
AUDIO signal (L.PCM)
when the digital sound signal is included at connecting HDMI equipment.
Sumpling freguency
48KHz / 44.1KHz / 32 KHz
Notes:
(1)This HDMI connector is Type A.
(2)If you cannot display the picture because your Digital Set Top Box does not have a Digital OUT terminal Output setting,
use the component Video input (or the S video Input or Video Input). In this case the picture will be displayed as an
analog signal.
(3) HDMI-DVI conversion cable (TY-SCHO3DH):available on Panasonic Website.
(www.panasonic.com)
HDMI Cable(not included)
HDMI
signal out
Set Top Box
DVD player
Audio Cable (not included)