Panasonic TH-50C300K, Руководство по обслуживанию

Страница: 8 / 38

TH-50C300K/TH-50C300M/TH-50C300S/TH-50C300T/TH-50C300X
8
5 Test and Alignment
5.1. Factory Menu Description
Follow the below steps to pop-up the Factory menu in case of “FactoryKey” is disabled:
• Press RCU “ MENU ” key to display main menu
• Select “ Picture ” and press “ OK ” key to enter into Picture submenu
• Scroll down to “ Contrast ” item
• Press the subsequence RCU keys “ 9 ”, “ 7 ”, “ 3 ” and “ 5 ”
In case of “ FactoryKey ” is enabled, just press RCU “ Return ” key to pop-up again the Factory menu.
The status of “ Factory Key ” can be changed in “ Factory Menu -> Hotkey ”
• Press RCU “ OK/
g
” key to enter the submenu.
• Press RCU “ Menu ” key to go back to the root menu.
• Press RCU “
f
/
g
” key to change the values.
• Press RCU “ OK ” key run the function.
• Press RCU “ Exit ” key exit the Factory menu.
1 - Hotkey submenu
2 - Warm-Up Mode submenu
3 - ADC submenu ( N/A - menu reains grayed)
4 - White Balance submenu
Item Sub-item Value Note
Hotkey Off/On Enable Hotkey flag by
pressing “
fg
” key to have
possibility to access Fac-
tory menu with “RETURN”
key (default is disabled)
Item Sub-item Value Note
Burning
Mode Off/On Enable Burning mode by
pressing “
fg
” key, then
press “ EXIT ” key to activate
it Press “ Menu ” key on
local keyboard to exit the
Burning mode
Item Sub-item Value Note
White Balance Source HDMI/VGA/DTV
PAL/SECAM
NTSC/RGB/CMP Select by pressing “
fg
”
key
Color Temperature Normal/Warm/Cool Select Tone by pressing
“
fg
” key
RED Gain 000..255 Set R Gain by pressing
“
fg
” key (-127..+128 for
offset)
GREEN Gain 000..255 Set G Gain by pressing
“
fg
” key (-127..+128 for
offset)
BLUE Gain 000..255 Set B Gain by pressing
“
fg
” key (-127..+128 for
offset)
RED Offset 000..255 Set R Offset by pressing
“
fg
” key (-127..+128 for
offset)