Panasonic TH-49DX400K, Руководство по обслуживанию

Страница: 10 / 46

5.1.5 VIF Initialization

No adjust.
5.1.6 System Setting
5.1.7 Panel Control
5.1.8 Others
No Item Description
1 Brightness Adjust the Brightness Curve.
2 Contrast
Adjust the Contrast Curve.
3 Saturation Adjust the Saturation Curve.
4 Hue
Adjust the Hue Curve.
5 Sharpness Adjust the Sharpness Curve.
6 Volume
Adjust the Volume Curve.
7 Backlight Adjust the Backlight Curve.
No Item Description
1 HOTKEY Press ◄/► button to switch factory hotkey on or off. For shipping condition, this item should be off.
2 AGING MODE Press ◄/► button to switch aging mode on or off. When aging mode is on, press EXIT button to exit
this mode.
3 Default Country No adjust.
4 POWER ON MODE Press ◄/► button to switch AC power on status. Memory is power on memorized, Seconda is power
on standby, Direct On is power on always.
5 Country Setup No adjust.
6 PQ FILE...update No adjust.
7 HDCP Key Update No adjust.
8 CI Plus Key Update No adjust.
9 IP Enable Mapping No adjust.
10 Mac Addr Update No adjust.
11 3D No adjust.
12 Linux TimeSource No adjust.
13 Channels No adjust.
14 SKY factory channel preset No adjust.
15 Burn MAC Press OK button from U disk write MAC.
16 Burn HDCP KEY Press OK button from U disk write HDCP KEY.
17 Burn WIDI KEY Press OK button from U disk write WIDI KEY.
18 Burn CI KEY Press OK button from U disk write CI KEY.
19 Burn ALL(MAC HDCPKEY
WDID CI KEY)
Press OK button from U disk write MAC ,HDCPKEY, WDID and CI KEY.
No Item Description
1 WHITE PATTERN No adjust. For shipping condition, this item should be off.
2 SSC Setting
Press OK to set the appropriate EMC values.
3 6M30 SSC Setting No adjust.
4 Gplus Mode No adjust.
No Item Description
1 Uart Enable Press◄/► button to switch Uart Enable on or off.
2 Uart BUS Press◄/► button to switch Uart BUS on or off.
3 Uart Msg Setting No adjust.
4 Restore to Default Press OK to execute factory reset.
5 AVD PAPAMETER No adjust.
6 WDT No adjust.
7 Mount Config No adjust.
8 Customer Info No adjust.
9 Unique Key Reencrypt No adjust.
10 PIP/POP No adjust.
11 PVR-Record All No adjust.
12 SECURE WRITE No adjust.
13 RAM Log No adjust.
Page 4 of 7
10/22/2017 file://\\royalfs\Service\Technical\Ms.dehghani\All SVC sent by CD\19\TH-49DX400SAL...