11
Basic Controls
MENU Screen ON / OFF
Each time the MENU button is pressed, the menu screen
will switch. (see page 13)
Volume Adjustment
Volume Up “+” Down “–”
When the menu screen is displayed:
“+” : press to move the cursor up
“–” : press to move the cursor down
(see page 13)
Remote control
sensor
Main Power On / Off Switch
Speakers
Brightness Sensor
Detects the brightness in the viewing
environment.
Main Unit
Power Indicator
The Power Indicator will light.
• Power-OFF .... Indicator not illuminated (The unit
will still consume some power
as long as the power cord is still
inserted into the wall outlet.)
• Standby ........ Red
• Power-ON ...... Green
• Power management (DPMS)
.......................Orange (PC IN or DVI-D IN
signal.)
When this function is set to On, it operates
under the following conditions to turn the power
on or off automatically.
When no pictures are detected for 30 or so
seconds during input from PC IN or DVI-D IN
terminal:
→
Power is turned off (standby); the power
indicator lights up orange.
When pictures are subsequently detected:
→
Power is turned on; the power indicator lights
up green.
• No activity power off
.......................
Red
When this function is set to “Enable”, the power
is turned off (standby) automatically when there
is no operation of the Plasma Display for 4 hours.
Starting from 3 minutes before the turn off, the
remaining time will be displayed.
No activity power off 3min
Press any key to abort.
Enter / Aspect button
(see page 13)
INPUT button
(INPUT signal selection)
(see page 10)
Normal Viewing
Picture
Sound
Pos. /Size
Setup
