Panasonic TH-43LFE8E Скачать руководство пользователя страница 61

Страница: 61 / 85

English

Button lock

Limits operation of the buttons on the unit.

[Off]:

All the buttons on main unit can

be used.

[MENU&ENTER]:

Locks <MENU (Unit)> and

<ENTER (Unit)> buttons.

[On]:

All button operations except for the

power switch are disabled.

■

To set [Button lock]

Set with the buttons on the unit.

[Off]:

   Press <+ (Unit)> for 4 times.
   Press <INPUT (Unit)> for 4 times.
   Press <- (Unit)> for 4 times.
   Press <ENTER (Unit)>.

[MENU&ENTER]:

   Press <ENTER (Unit)> for 4 times.
   Press <+ (Unit)> for 4 times.
   Press <INPUT (Unit)> for 4 times.
   Press <ENTER (Unit)>.

[On]:

   Press <- (Unit)> for 4 times.
   Press <ENTER (Unit)> for 4 times.
   Press <+ (Unit)> for 4 times.
   Press <ENTER (Unit)>.

Controller user level

Limits operation of the buttons on the remote control.

[Off]:

You can use all of the buttons on the remote

control.

[User1]:

You can only use standby (ON/OFF) button,

and <VOL -> buttons on the remote control.

[User2]:

You can only use standby (ON/OFF) button

on the remote control.

[User3]:

Locks all the buttons on the remote control.

PC auto setting

Sets the operational mode of the automatic position

adjustment in the [Position] menu.

[Off]:

Automatic position adjustment starts when

<AUTO SETUP> is pressed on the remote

control or automatic position adjustment is

executed from the [Position] menu.

[On]:

Other than remote control or menu

operation, automatic position adjustment

starts:
When the display power is turned ON.
When the input signal is switched.

Off-timer function

Enables / disables Off timer function.

[Enable]:

Enables the [Off-timer function].

[Disable]:

Disables the [Off-timer function].

Note

●

When [Disable] is set, the Off-timer is cancelled.

Initial power mode

Sets the power mode of the unit for when the power

recovers from failure or after plugging off and in again.

[Normal]:

Power returns in as the same state as

before the power interruption.

[Standby]:

Power returns in standby mode.
(Power Indicator: red/orange)

[On]:

Power returns in power On.
(Power Indicator: green)

Note

●

When using multiple displays, [Standby] is preferred

to be set in order to reduce a power load.

Display ID

Sets ID number when controlling the Display with

[Controller ID function] and [Serial ID function].

0 - 100 (Standard value: 0)

Controller ID function

Enables/Disables the ID remote control function.

[Off]: Disables the ID remote control function. (Can

be operated as normal remote control.)

[On]: Enables the ID remote control function.

Effective on switching to [On].

Note

●

To use the ID remote control function, setting ID

numbers both for the remote control and for the

display unit is required.
For ID number setting for the remote control

and display unit, see page 73 and [Display ID]

respectively.

Содержание TH-43LFE8E






















































































Результаты поиска

Содержание TH-43LFE8E

Отзывы:

Бренды по названию

Популярные бренды

Panasonic TH-43LFE8E, Руководство по эксплуатации

Результаты поиска

Содержание TH-43LFE8E

Отзывы:

Бренды по названию

Популярные бренды