21
7.11. Remove the SS-Board
1. Unlock the cable clampers to free the cable.
2. Disconnect the connectors (SS11, SS12, SS33, SS34
and SS35).
3. Disconnect the flexible cables (SS61, SS63, SS64 and
SS66).
4. Remove the screws (
×
6
) and remove the SS-Board.
7.12. Remove the Stand brackets
1. Remove the Plasma panel section from the servicing
stand and lay on a fiat surface such as a table (covered)
with the Plasma panel surface facing downward.
2. Remove the Stand brackets (L, R) fastening screws (
×
3
,
×
1
each) and remove the Stand brackets (L, R).
7.13. Remove the D-Board
1. Remove the tuner unit. (See section 7.6.)
2. Disconnect the connectors (D3, D5 and D25).
3. Disconnect the flexible cables (D20, D31, D32 and D33).
4. Remove the screws (
×
4
) and remove the D-Board.
7.14. Remove the C1-Board
1. Remove the tuner unit. (See section 7.6.)
2. Remove the Stand bracket R. (See section 7.12.)
3. Remove the screws (
×
3
) and Remove the Cabinet
mount metal.
4. Remove the DD-Heat-sink holder fastening screws
(
×
16 ).
5. Remove the DD-Heat-sink (
×
8).
6. Disconnect the flexible cables (CB1, CB2, CB3, CB4,
CB5, CB6, CB7 and CB8).
7. Disconnect the flexible cables (C10, C11 and C12).
Содержание TH-42PY800H
