Panasonic TH-42PWD3, Руководство по обслуживанию

Страница: 20 / 121

)
** Adjust at the dark room.
1 Component Picture: PANEL W/B
(525i, 525p, 625i, Normal R cut off 1) Set R,G and B cut off to "
80
".
720i or 1080i) White balance: G cut off
Cool B cut off
Gray Scale Aspect:
Chroma Control:
Pattern 16:9
Gun off 2) Set Gun off to "
5 ". (Only green pixels can emit.)
RGB Sub Adjust:
G Sub Bright 3) Adjust G Sub bright to start some of green pixels emission
at black 2% area and no emission at black 0% area.
Chroma Control:
Gun off 4) Set Gun off to "
3 ". (Only blue pixels can emit.)
RGB Sub Adjust:
Black 2 % B Sub Bright 5) Adjust B Sub bright to start some of blue pixels emission
Black 0 % at black 2% area and no emission at black 0% area.
Chroma Control:
Gun off 6) Set Gun off to "
6 ". (Only red pixels can emit.)
RGB Sub Adjust:
R Sub Bright 7) Adjust R Sub bright to start some of red pixels emission
at black 2% area and no emission at black 0% area.
2 RGB(PC) Picture: 1) Change input to RGB signal.
Gray Scale Normal PANEL W/B
Pattern White balance: R,G,B cut off 2) Repeat procedure 1) to 7) of Component input signal.
Cool PANEL W/B
Aspect: R,G,B Drive
16:9
Black 2 %
Black 0 %
INPUT Alignment menu Procedure Equipment Setting
(