9
Connections
SERIAL
PC IN
AUDIO
To tighten:
To loosen:
Push
the catch
Pull
Pull
1
2
1
2
1
2
SPEAKERS
Terminals (R)
SPEAKERS
Terminals (L)
– Cable fixing bands
Secure any excess cables with bands as required.
When connecting the speakers, be sure to use only the optional accessory speakers.
Refer to the speaker’s Installation Manual for details on speaker installation.
Speakers (Optional accessories)
Pass the attached cable fixing
band through the clip as
shown in the figure.
To secure cables connected to Terminals, wrap the
cable fixing band around them then pass the pointed
end through the locking block, as shown in the figure.
While ensuring there is sufficient slack in cables
to minimize stress (especially in the power cord),
firmly bind all cables with the supplied fixing band.
From SERIAL Terminal on
Computer (see page 12)
From EXIT monitor terminal
on Computer (see page 10)
AC cord connection (see page 14)
