Panasonic TH-42PH11RK, Руководство по эксплуатации

Страница: 35 / 52

3D Y /C Filter (NT S C)
Colour syste m
S i g n a l
On
A uto
Cine ma re a lity
P a n a sonic A uto (4 : 3)
O ff
4 : 3
[
AV ]
Noise reduction
O ff
Re f resh R a te 100 H z
Cine ma re a lity O ff
X G A Mode 10 2 4 × 768
35
Setup for Input Signals
Colour system / Panasonic Auto
Select Signal from the “Setup” menu during AV(S Video) input signal. (“Signal [AV]”
menu is displayed.)
Press to select the “Colour system” or “Panasonic Auto”.
Press to select each functions.
If the picture image becomes unstable:
With the system set on Auto, under conditions of low level or noisy input signals the image may in rare cases
become unstable. Should this occur, set the system to match the format of the input signal.
Cinema reality
Press to select Cinema reality.
Press to set On / Off.
Cinema reality:
When on, the display attempts to reproduce a more natural interpretation of sources such as movie pictures, which
are recorded at 24 frames per second. If the picture is not stable, turn the setting to off.
Note:
When On, this setting only affects the following signal input:
• NTSC / PAL signal input during “AV(S Video)” input signal.
• 525i(480i),
6 25i(5 7 5i), 1125(1080) / 6 0i signal input during “Component” input signal.
Mode Function
Colour system Set the colour system to match the input signal. When selecting “Auto”, the colour system is automatically
selected from NTSC/PAL/SECAM, however, M.NTSC signal is not displayed properly depending on
the attached terminal board. To display M.NTSC signal, select “M.NTSC” in Colour system.
Auto SECAM M.NTSC NTSC PAL
Panasonic Auto
(4 : 3) Set to “4 : 3” to view 4:3 images in an unchanged format when Panasonic Auto is selected.
If you would like to view 4:3 images in Just format, set to “Just”.
Note:
Panasonic Auto does not function when BNC Dual Video Terminal Board (TY-FB9BD) is used.
XGA Mode
This menu is displayed when the input signal is analog (Component/PC). This unit supports three types of XGA signals
with
6 0Hz vertical frequency having different aspect ratios and sampling rates (1,024 × 76 8 @ 6 0Hz, 1,280 × 76 8 @
6 0Hz, and 1,3 66 × 76 8 @ 6 0Hz). Be sure to make settings in accordance with the input signal in order to achieve a
more appropriate and attractive display.
In addition, after making this setting, be sure to make each adjustment (such as “Auto Setup”) on the “Pos. /Size”
menu as necessary. (see page 22)
Press to select “XGA Mode”.
Press to select “1024× 76 8”, “1280× 76 8” , “13 66 × 76 8”.
Downloaded From TV-Manual.com Manuals