1/2
SIGNAL
EXTENDED LIFE SETTINGS
INPUT LABEL
SET UP
OFF
STANDBY SAVE
OFF
PC POWER MANAGEMENT
ON
DVI-D POWER MANAGEMENT
OFF
OSD LANGUAGE
ENGLISH (US)
COMPONENT/RGB-IN SELECT
RGB
SCREENSAVER
POWER SAVE
NO SIGNAL POWER OFF
ENABLE
NO ACTIVITY POWER OFF
DISABLE
3D SETTINGS
3D Y/C FILTER (NTSC)
COLOR SYSTEM
SIGNAL
ON
AUTO
3 : 2 PULLDOWN
OFF
[ VIDEO ]
NOISE REDUCTION
OFF
3 : 2 PULLDOWN
SIGNAL
OFF
[ Digital ]
NOISE REDUCTION
OFF
H-FREQ.
V-FREQ.
kHz
Hz
63.98
60.02
DOT CLOCK FREQ.
MHz
108.0
SIGNAL FORMAT 1280×1024/60i
SIGNAL
[ COMPONENT ]
XGA MODE
AUTO
NOISE REDUCTION
OFF
H-FREQ.
V-FREQ.
kHz
Hz
63.98
60.02
SIGNAL FORMAT 1280×1024/60i
SYNC
3 : 2 PULLDOWN
AUTO
OFF
SYNC
SIGNAL
H-FREQ.
V-FREQ.
kHz
Hz
63.98
60.02
SIGNAL FORMAT 1280×1024/60i
[ RGB ]
3 : 2 PULLDOWN
XGA MODE
NOISE REDUCTION
OFF
AUTO
OFF
AUTO
• 3D Y/C FILTER (NTSC)
This menu is displayed when BNC Dual Video Terminal
Board (TY-FB9BD) is installed to the unit.
Set this menu when the moving image looks unnatural
during Video (S Video) input signal.
ON
OFF
Note:
When ON, this setting only affects NTSC input signals.
• COLOR SYSTEM
AUTO
SECAM
M.NTSC
NTSC
PAL
Set the color system to match the input signal. When “AUTO” is set, COLOR SYSTEM will be automatically selected
from NTSC/PAL/SECAM/M.NTSC.
To display PAL60 signal, select “AUTO” or “PAL”.
If the image becomes unstable:
With the system set on Auto, under conditions of low level or noisy input signals the image may in rare cases become
unstable. Should this occur, set the system to match the format of the input signal.
3:2 PULLDOWN
When “ON”, the display attempts to reproduce a more natural interpretation of sources such as movie pictures, which
are recorded at 24 frames per second.
If the picture is not stable, turn the setting to “OFF”.
ON
OFF
Note:
When ON, this setting only affects the following signal input:
• NTSC / PAL signal input during Video (S Video) input signal.
• 525i(480i), 625i(575i), 1125(1080)/60i signal input during “COMPONENT” input signal.
• XGA MODE
This menu is displayed when the input signal is analog (Component/PC).
This unit supports three types of XGA signals with 60Hz vertical frequency having different aspect ratios and sampling
rates (1,024 × 768 @ 60Hz, 1,280 × 768 @ 60Hz and 1,366 × 768 @ 60Hz).
AUTO
1024×768
1280×768
1366×768
AUTO:
Automatically selected from 1024×768/1280×768/1366×768.
Switch the setting to suit the input signal for better display depends on the angle of view or display resolution condition.
Note:
After making this setting, be sure to make each adjustment (such as “AUTO SETUP”) on the “POS./SIZE” menu as
necessary. (see page 26)
50
Press to select the menu to adjust.
Press to adjust the menu.
Press to exit from adjust mode.
Note:
“SIGNAL” setup menu displays a different setting condition for each input signal.
3
4
SET UP for Input Signals
SIGNAL menu
For VIDEO (S VIDEO)
Press to display the SET UP menu.
Press to select the “SIGNAL”.
Press to display the SIGNAL menu.
2
1
For RGB
For COMPONENT
For Digital
Press ACTION ( ) button
