Panasonic TH-42PA30E, Руководство по обслуживанию

Страница: 312 / 371

g. Remove the screws (×2) and remove the G-Board.
16. Remove the Front frame (glass).
a. Remove the front frame and the plasma panel fastening
screws (×10 ), and remove the front frame and the
stand braket fastening screws(×6 ).
b. Release all cables from the clamper on the bracket of
the front frame.
c. For leaving the the plasma panel from the front frame,
pull the bottom of the front frame forward, lift, and
remove.
17. Remove stand brackets.
a. Remove the plasma panel section from the servicing
stand and lay on a surface such as a table (covered),
with the plasma panel surface facing downward.
Spread a soft cloth or similar on the table for protection,
so the panel surface is not scratched.
b. Remove the stand bracket (left, right) fastening screws
(×4 each) and remove the stand brackets (left, right).
18. Replace the plasma panel (finished).
a. Place the new plasma panel (finished) on the flat
surface of the table (covered by a soft cloth), with the
plasma panel surface facing downward.
b. Fit the stand brackets (left, right) to the new plasma
panel.
c. Place the plasma panel section on the servicing stand.
d. Attach the front frame and the each P.C.Board and so
on, to the new plasma panel.
* When fitting the front frame, be careful not to allow
any debris, dust or handling residues to remain
between the front glass and plasma panel.
14
TH-37PA30E / TH-42PA30E