Panasonic TH-103PF9EK, Руководство по эксплуатации

Страница: 8 / 48

8
Connections
1
2
AUDIO OUT
R L
SLOT1 SERIAL PC IN
AUDIO
SLOT3
P
R
/C
R
/R P
B
/C
B
/B Y/G
AUDIO R L
COMPONENT/RGB IN
SLOT2
AUDIO
DVI-D IN
AUDIO OUT
R L
– Cable fi xing bands Secure any excess cables with bands as required.
Pass the attached cable
fi xing band through the
clip as shown in the
fi gure.
To secure cables connected to Terminals, wrap the cable fi xing band around them
then pass the pointed end through the locking block, as shown in the fi gure.
While ensuring there is suf fi cient slack in cables to minimize stress (especially
in the power cord), fi rmly bind all cables with the supplied fi xing band.
To tighten: To loosen:
Pull
Pull
Push the catch
Note:
At factory shipment, Terminal boards are installed in SLOT 2 and SLOT 3.
AUDIO OUT Terminals connection
Push until the
hook clicks.
2. Pull off.
1. Keep the knob
pressed.
Stereophonic sound code
audio equipment
line-in
AC cord connection (see page 12)
– AC cord fi xing
Unplug the AC cord
Unplug the AC cord pressing
the two knobs.
Close
Open
Plug the AC cord into the display unit.
Plug the AC cord until it clicks.
Fix the AC cord with the clamper.
Note:
Make sure that the AC cord is locked.
From SERIAL
Terminal on Computer
(see page 10) From EXTERNAL
monitor terminal on
Computer (see page 9) Optional Terminal
Board Insert Slot
(covered) DVI-D IN
Terminals
(see page 11) COMPONENT/RGB IN
and Audio IN Terminals
(see page 11) From input on
audio ampli
fi er
(see page 8)