Panasonic TH-103PF10UK - 103" Plasma Panel, Руководство по обслуживанию, Страница: 12 / 131

TH-103PF10UK/EK
5.1.2. CD mode
Select the CD mode by Up / Down button on the remote control at the front page of CAT mode and then press the M ute button on
the remote control more than 3 seconds.
CD
MOSI I TOR—MCU
1.0100F10 OK !
MON 1 TOR—EEPROM DN 71.01 1 ЗС 7C !
MONITOR-EEPROM H 7. 00 ED 4B ;
MONITOR-FPGA 1/2
10 5
MONITOR-EEPROM Change Addr 00 01
Data
01 01 ■
PANEL-MCU 7T00
PANEL-EEPROM 97103
PANEL-FPGA 97102
PANEL-PDROM 98100
PTCT 00. (10. 00. 00. 00. ■
Factory use
■ New data
■SOS history
■Original data
Microcomputer software version (IC4002), this version can be upgrade by
1. replace of new version IC
2. Loading the new version software from loader tool, TZSC07036.
Memory data change
... Change by U p /D o w n buttons on the
Address
0
0
_ remote control.
Change by L e ft/R ig h t buttons on the remote control.
Data
0
0
■Change by V O L Up /D o w n buttons on the
remote control.
The data is memorized when switch off the main power.
To exit the CD mode, press the R button on the remote control.
5.1.3. SD mode
Select the SD mode by Up / Down button on the remote control at the front page of CAT mode and then press the Action button
on the remote control.
To exit the SD mode, press the R button on the remote control.
12