Panasonic TH-103PF10UK - 103" Plasma Panel Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 60

background image

5

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced technician for help.

This device complies with Part15 of the FCC Rules. Operation is subject to the following two conditions:(1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.

FCC CAUTION:
To assure continued compliance, use only shielded interface cables when connecting to computer or
peripheral devices. Any changes or modifications not expressly approved by Panasonic Corporation of
North America could cause harmful interference and would void the user’s authority to operate this device.

FCC Declaration of Conformity

Model No. TH-103PF10UK

Responsible Party:

Panasonic Corporation of North America

One Panasonic Way, Secaucus, NJ 07094

Contact Source:

Panasonic Professional Display Company

Panasonic Plasma Concierge 1-888-972-6276

email:

[email protected]

CANADIAN NOTICE:

This Class B digital apparatus complies with Canadian ICES-003.

Note:

Do not allow a still picture to be displayed for an extended period, as this can cause a permanent image retention to
remain on the Plasma Display.
Examples of still pictures include logos, video games, computer images, teletext and images displayed in NORMAL mode.

Trademark Credits

• VGA is a trademark of International Business Machines Corporation.
• Macintosh is a registered trademark of Apple Computer, USA.
• S-VGA is a registered trademark of the Video Electronics Standard Association.
Even if no special notation has been made of company or product trademarks, these trademarks have been fully

respected.

• HDMI, the HDMI logo and High-Defi nition Multimedia Interface are trademarks or registered trademarks of HDMI

Licensing LLC.

FCC STATEMENT

«
...
3
4
5
6
7
...
»

Содержание TH-103PF10UK - 103" Plasma Panel





























































Отзывы:

Нет отзывов

Похожие инструкции для TH-103PF10UK - 103" Plasma Panel

Бренд: Safety 1st Страницы: 22

Бренд: Sanitas Страницы: 33

Бренд: Sanitas Страницы: 60

Бренд: Sanitas Страницы: 96

Бренд: Sanitas Страницы: 52

Бренд: Vector Страницы: 42

Coronis 5MP (MFGD5421)

Бренд: Barco Страницы: 2

Бренд: Hanns.G Страницы: 20

Бренд: ViewSonic Страницы: 25

Бренд: Microtek Страницы: 17

Бренд: Crystal Image Technologies Страницы: 28

Бренд: Acer Страницы: 37

Бренд: MicroTouch Страницы: 27

E50 - 15" CRT Display

Бренд: ViewSonic Страницы: 2

PDK 111C-0WG13L

Бренд: IEE Страницы: 8

Бренд: iAN Страницы: 40

Nio Fusion 12MP

Бренд: Barco Страницы: 70

Бренд: Panasonic Страницы: 58

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды