background image

8

9

Quick Start 

Guide

 Accessories/Optional Accessory

Accessories

Assembly screws 

(4 of each)

 

A

(for 42”/46”/50”)

  M5 × 18 (Silver)

(for 54”)

  M5 × 25 (Silver)

B

(for 42”/46”/50”)

  M5 × 25 (Black)

(for 54”)

  M5 × 30 (Black)

Poles (2)

L

R

  

L

 or 

R

 is printed at the 

bottom of the poles.

 Base (1)

(for 42”/46”/50”)

(for 54”)

Accessories/Optional Accessory

Accessories

Check you have all the items shown.

Remote Control
Transmitter

 N2QAYB000322

Batteries for the
Remote Control
Transmitter (2)

 AA Battery

AC cord

Pedestal

 TBLX0091 

(TC-P42G10)

 TBLX0092 

(TC-P46G10, 

TC-P50G10)

Product Registration Card (U.S.A.)

Customer Care Plan Card (U.S.A.)

Operating Instructions

Viera Concierge and basic 
instruction for HDTV

Installing the remote’s batteries

Pull open

Hook

Note the correct 

polarity (+ or -).

Close

Caution

 Incorrect installation may cause battery 

leakage and corrosion, resulting in 

damage to the remote control.

 •  

Do not mix old and new batteries.

 •  

Do not mix different battery types 

(such as alkaline and manganese 

batteries).

 •  

Do not use rechargeable (Ni-Cd) 

batteries.

 Do not burn or break batteries.

Optional Accessory

Note

 In order to maintain the TV’s performance and safety, be absolutely sure 

to ask your dealer or a licensed contractor to secure the wall-hanging 

brackets.

 Carefully read the instructions accompanying the plasma TV stand or 

pedestal, and be absolutely sure to take steps to prevent the TV from 

tipping over.

 Handle the TV carefully during installation since subjecting it to impact 

or other forces may cause its panel to crack.

Wall-hanging bracket

(angle)

 TY-WK4P1RW (for 42”/46”/50”)

 TY-WK5P1RW (for 54”)

Attaching the pedestal to TV

Assembling the pedestal

 

 Fix securely with assembly screws 

A

. (Total 4 screws)

 

 Tighten screws firmly.

 

(Image: TBLX0091)

A

L

R

Pole

Front

Pole

Base

Set-up

 

 Carry out work on a horizontal and level surface.

 

 Tighten screws firmly.

B

 Fix securely with assembly 

screws 

B

. (Total 4 screws)

Rear side

Arrow 

mark

Pole

Hole for pedestal 

installation 

Pole

 Base 

Bottom view

(Image: TC-P50G10)

Warning

Do not disassemble or modify the pedestal.

 Otherwise the TV may fall over and become damaged, and personal injury may result.

Caution

Do not use any other TV and displays.

 Otherwise the TV may fall over and become damaged, and personal injury may result.

Do not use the pedestal if it becomes warped or physically damaged.

 If you use the pedestal when it is physically damaged, personal injury may result. Contact your nearest Panasonic 

Dealer immediately.

During set-up, make sure that all screws are securely tightened.

 If sufficient care is not taken to ensure screws are properly tightened during assembly, the pedestal will not be 

strong enough to support the TV, and it might fall over and become damaged, and personal injury may result.

Accessories

Cleaning cloth

How to assemble (p. 9)

 TBLX0102

(TC-P54G10)

Содержание TC-P42G10




































Отзывы: