Panasonic TC-23LX60, TC-26LX60C, TC-26LX60L, TC-32LX60C, TC-32LX60L, Руководство по обслуживанию

Страница: 8 / 53

7 Service Mode
7.1. How to enter into adjustment
mode
While pressing [VOLUME-] button of the main unit, press
[RECALL] button of the remote control transmitter three times
in a row (within 2 seconds).
7.2. Adjustment method.....Use the
remote control.
“1” button...Main items Selection in forward direction
“2” button...Main items Selection in reverse direction
“3” button...Sub items Selection in forward direction
“4” button...Sub items Selection in reverse direction
7.3. Cancellation
Switch off the power with the [POWER] button on the main unit
or the [POWER] button on the remote control.
7.4. Contents of adjustment mode
•
Value is shown as a hexadecimal number.
•
Preset value differs depending on models.
•
After entering the adjustment mode, take note of the value
in each item before starting adjustment.
Main Item Sub Item Remarks
PCT-ADJ COLOR Sub color Adjustment
R-Y-A recovery axis (R-Y)
B-Y-G Gain (B-Y)
BACK-L Sub-backlight
TINT Tint Adjustment
WB-ADJ (White
balance
adjustment) B-CENT Blue Gain by test pattern (50% white)
G-CENT Green Gain by test pattern (50% white)
R-CENT Red Gain by test pattern (50% white)
B-GAIN Blue Gain by test pattern (100% white)
G-GAIN Green Gain by test pattern (100% white)
R-GAIN Red Gain by test pattern (100% white)
OPTION OPTOO TV (for TV) (Not ADJ)
CEC-CHK For service only
EEP-COPY For service only
MTS-ADJ MTSIN RF Audio input level detection
SEPAH Stereo separation Hi
SEPAL Stereo separation low
8 Troubleshooting Guide
8.1. Self-check function
When phenomena like "the power fails from time to time" or
"the video/audio fails from time to time" can not be
confirmed at the time of servicing, the self-check function
can be used to confirm the occurrence and to limit the
scope for the defective circuits. Also, when "the power fails
from time to time", display on the screen can be used to
confirm the occurrence and to limit the scope for the
defective circuits.
Any programmed channels, channels caption data and
some other user defined settings will be erased and return
to factory setting.
8.2. How to access
Access
Produce TV reception screen and, while pressing
[VOLUME -] button on the main unit, press [SLEEP] button
on the remote controller unit simultaneously.
Exit
Press the POWER button twice (off/on) to return to the
normal screen.
8.3. Screen Display
9 Disassembly Instructions
Back cover removal (screw location)
1. Remove all the screw from the back cover indicated with
arrows.
8