Panasonic T-Mobile KX-HDV130, Руководство по эксплуатации

Страница: 61 / 116

6.
Press
Save
.
*1
Repeat this step to add additional phone number types.
*2
This step can be omitted if you do not want to assign a category.
*3
This step can be omitted if you do not want to assign a default number. (The first number entered for an entry will automatically be
assigned as the default number.)
Note
•
The valid digits are "0" through "9", " ", " ", " ", "P".
•
To enter characters, see "2.8.3 Entering Characters".
Storing an Item Using the Incoming or Outgoing Call Log
You can add a number listed in the Incoming or Outgoing Call Log to the Local Phonebook.
To add a new entry
1.
In standby mode, display the Incoming or Outgoing Call Log (see 2.8.4 Using the Incoming/Outgoing
Call Log).
2.
Press [▲] or [▼] to select the desired item, and then press
OK
.
3.
Press [▲] or [▼] to select "Save Phonebook", and then press
OK
.
a.
Edit the name if desired, and then press
OK
.
4.
Press [▲] or [▼] to select a phone number type (
1
to
5
), and then press
OK
.
*1
a.
Edit the phone number if desired, and then press
OK
.
5.
Press [▲] or [▼] to select "Category Off", and then press
OK
.
*2
a.
Select a category, and then press
OK
.
6.
To select a default number for the entry, press [▲] or [▼] to select "Default TEL No", and then press
OK
.
*3
a.
Press [▲] or [▼] to select the number to use as the default number, and then press
OK
.
7.
Press
Save
.
*1
Repeat this step to add additional phone number types.
*2
This step can be omitted if you do not want to assign a category.
*3
This step can be omitted if you do not want to assign a default number. (The first number entered for an entry will automatically be
assigned as the default number.)
Note
•
The valid digits are "0" through "9", " ", " ", " ", "P".
•
To enter characters, see "2.8.3 Entering Characters".
3.6.2 Editing a stored item in the Local Phonebook
Editing a Stored Item
1.
In standby mode, press .
2.
Press [▲] or [▼] to select "Phonebook"
*1
, and then press
OK
.
3.
Enter the name or the first character(s) of the desired name, and then press
OK
.
4.
Press [▲] or [▼] to select the desired name, and then press
Menu
.
3.6.2 Editing a stored item in the Local Phonebook
Document Version: 2017-08 Operating Instructions 61