- 7 -
SR-GA281 / SR-GA421 / SR-GA721
C. Thermal Fuse
A. Improper contact between heater and pan
Cause of Fusion
The thermal fuse is used to open the circuit to the cooking heater when the temperature has gone unusually
high. This happens in cases such as incomplete contact between the heater and pan or if the switch button
is forced to stay on keeping the heater energized abnormally.
Whenever replacing the fuse make sure the protective cover is placed over all exposed wiring.
When fusion takes place, check the cause, set right the faulty section and be sure to use the replacement
parts.
This fuse is not a resetting device and must be replaced after openning.
Pan collar or deformed
Foreign matter adhering.
Remove foreign matter by
of (-) screw-driver, etc.,
and then polish with = 320
water paper while wetting
it with water.
Body dented or deformed.
Pan bottom dented or
deformed.
Heater surface deformed
or corroded.
Repair or replace body.
Replace pan.
Replace cooking heater.
Remedy
Cause
B. Forced application of current
Chopstick, wooden piece,
etc., inserted onto cooking
button. (continuous appli-
cation of current)
Inserted to prevent earlier
turning off? Refer to cause
in (A) above.
Switch lever deformed or
maladjusted, causing
continuous application of
current.
Repair or replace parts.
Remedy
Cause
