110
LSQT1011
W
it
h
o
the
r
pr
oduc
ts
With a printer (PictBridge)
6 Select the date print setting on [
DATE PRINT].
≥
If the printer is not capable of date printing, this setting is unavailable.
7 Select the paper size setting on [
PAPER SIZE].
≥
You cannot set paper sizes not supported on the printer.
8 Select the layout setting on [
PAGE LAYOUT].
≥
You cannot set page layouts not supported on the printer.
9 Select [
PRINT]
#
[YES] and press the joystick.
The pictures are printed.
≥
Exit PictBridge by disconnecting the USB cable (supplied) after the
pictures have been printed.
When you stop printing halfway
Move the joystick down.
A confirmation message appears. If [YES] is selected, the number of prints set is canceled and the
screen returns to step 3. If [NO] is selected, all the settings are kept and the screen returns to
step 3.
≥
Avoid the following operations during printing.
These operations disable proper printing.
– Disconnecting the USB cable
– Removing the SD card
– Switching the mode dial
– Turning off the power
≥
Check the settings for the paper size, quality of
print, etc. on the printer.
≥
The sides of pictures recorded when [
]
(VDR-D300)/[
] (VDR-D250) is set may be cut
at printing. Check before printing.
When using the printer with a trimming feature or
other feature which cuts out both edges of the
pictures, cancel the feature for printing. (Refer to the
operating instructions of the printer for details.)
≥
You may not be able to print still pictures recorded
with other products.
≥
When the unit is connected directly to the printer,
the DPOF settings cannot be used.
≥
Connect the printer directly to this unit. Do not use a
USB hub.
STANDARD:
Size specific to the printer
4
t
5 INCH:
L size
5
t
7 INCH:
2L size
4
t
6 INCH:
Postcard size
A4:
A4 size
STANDARD:
Layout specific to the printer
:
No frame print
:
Frame print
2
1.7
D250&300(P_PC)eng.book 110 ページ ２００６年１月２０日 金曜日 午後２時３分
Содержание Spanish)
Страница 179: ...179 LSQT1011 Others ...
