Panasonic SP28P, Руководство по эксплуатации

Страница: 105 / 162

Page 3-27
FUNCTIONS
3
3-5 Machine Settings
This is used to set the state of this machine that is independent of the production data.
1
. Press
Machine
config
on the main menu.
• “Machine configuration menu” is displayed.
3-5-1 Switches for Adjustment
You can change the conditions of production motion for adjustment temporarily.
Normally, all the items are ON except Simulate mode .
Pressing Default or restarting the machine returns the settings to the normal ones.
Simulate mode
ON : Printing motion repeats continuously.
Print status check
ON : Printed board is stopped without transport-
ing to the next process, so you can pick it
out to check.
Print operation
ON : Printing is performed.
PCB extend check
ON : Board extension check is performed.
Mask recognition
ON : Mask recognition is performed.
RecogFilterChange
ON : When the board is recognized, the filter to
recognize the special board, such as a
ceramic board, is used.
1E4C-E-OMA03-A02-01