8
RQT6782
Change the frequency step according to the area.
Preparation
: Press [RADIO/BAND] to switch on the power.
Press and hold [RADIO/BAND]
until the step appears.
Within 10 seconds
Press to select the step.
Each time you press [
j :
,
9 i
]
Within 10 seconds
Press and hold [MEMORY/RECALL] until the frequency appears
to confirm the step.
∫
To return to the previous frequency step
Repeat the above procedure.
≥
Changing the step erases the stations you stored in memory.
Listening to the Radio
To obtain good reception
To select stereo or monaural FM
When using overseas
MONO
FM U0.2
FM U0.1
E
Changing the sound quality
AM
Try various directions to obtain
optimum reception.
FM
The headphone cord is also the FM antenna, so extend it instead of
leaving it coiled.
Set to “MONO” when there is noise during FM reception.
Sound becomes monaural, but noise is reduced.
Each time you press [FM MODE MONO/ST]
The operation is the same as when playing CDs. (
➪
page 6)
To receive an FM broadcast clearly
Set to “CITY” if reception is poor or if there is interference from another station.
Each time you press and hold [FM RECEPT
%
CITY/NOR]
CITY
No display
(canceled)
FM 0.2 MHz,
AM 10 kHz
(original setting)
FM 0.1 MHz,
AM 10 kHz
FM 0.05 MHz,
AM 9 kHz
No display
(stereo)
1
3
2
FM
U 0 2
.
ONLY
SL-SW963VJ
∫
Using headphones
≥
Before jogging with this unit, allow sufficient time for the memory
buffer to fill up completely (CD-DA: 45 seconds, MP3: 100 seconds).
≥
This unit is designed for light jogging, but not for serious running.
It may occasionally skip if used by an aggressive runner, or by
someone with a heavy, jarring stride.
≥
Do not machine wash
.
Fading and loss of shape can occur.
≥
Do not drop the unit as the soft case cannot protect the unit and CD
from damage.
Fasten the belt securely.
Insert so buttons are facing
away from your body.
While
jogging, hold
the unit as
shown.
Bottom of the unit
∫
Attaching the hand strap
∫
Using jogger soft case
Hand strap
ONLY
SL-SW963VJ
