10
Setup
10
RQ
TX
01
27
ENG
L
IS
H
Setup
To activate the second SH-FX67 for 7.1ch-setup, it is necessary
to be paired to work with the other SH-FX67.
≥
Keep the transmitter cards of the additional wireless system for
later use.
Preparation
≥
Make sure to connect the AC mains lead of the additional
wireless system.
≥
Turn on the home theater unit and reduce the volume.
1 Turn on the additional wireless system.
2 While pressing the skip and slow-search button (e.g. [
5
/
9
] ) on the home theater unit, press the numbered button
[3] on the remote control until “P” lights in the home theater
unit’s display.
3 While “P” is displayed, press
[I/D SET] on the rear of the
additional wireless system.
≥
If “P” goes off before you
press [I/D SET], repeat step 2 and then continue the
procedure.
4 While pressing [
5
/
9
] on the home theater unit, press
the numbered button [3] on the remote control.
≥
AUTO OPERATION ON/OFF indicator lights green.
5 Turn off and on the additional wireless system.
[Note]
≥
If you should change the transmitter card, repeat the pairing
steps for both units of the wireless system.
≥
You cannot use the wireless system with SH-FX65T transmitter
card.
Using the surround back speakers
Use only the SH-FX67T transmitter card.
Wireless system is originally paired to work with the SH-
FX67T transmitter card that comes along with it. For any
other accessories to work with the SH-FX67T transmitter
card in use, pairing is necessary.
Pairing is necessary.
Wireless system
Home theater unit
Additional ireless system
e.g. After pairing
Use a pointed object.
SH-FX67_RQTX0127_En_181107.fm Page 10 Sunday, November 18, 2007 11:34 AM
